MC-EX-QA8 | Transistor Output Expansion Module

  2. Home
  4. Docs
  6. MC-EX-QA8 | Transistor Output Expansion Module
  8. Expansion Module Startup Guide
  10. Run Example Program

Run Example Program

  1. After following Figure 1(a), (b) diagram instructions in Wiring Diagram sections . Connect a Transistor Output Expansion module in to the 40
    pin board to board connector in CPU Module (Explained in MC-CPU-CM4-Gx datasheet).
  2. Now open Terminal Window after turn on the CPU Module.
  3. Type ‘i2cdetect -y 0’ command and run the command.
  4. The result will be similar to the Figure 1 shown below.
  5. Here the ‘0x27’ is the Transistor Output expansion module I2C address, This I2c address can be changed according to user requirement
    by changing the DIP switch configuration (Check Figure 1(a)) on expansion module.
Figure 1(a): DIP Switch Configuration Address present in Decimal
Figure 1(b): The Transistor Output Module I2C address check result .
  1. Follow the File Manager > Pi > Rpi_Moduler_test path, then open Rpi_Moduler_test folder.
  2. In Rpi_Moduler_test folder include example program for every expansion module.
  3. Select the MC_EX_MC23xx_TOUT.py example program that matches with the Transistor Output expansion module shown in Figure 2.
Figure 2: The example programs for expansion modules.

9. The python program will open on default Thonny Python IDE. Click RUN for start the program shown in Figure 3.

Figure 3: Transistor Output example code run on Thonny Python IDE.
Was this article helpful to you? Yes No

How can we help?